N.O.S. and Used Original Parts For Sale - 2022

DCL70

Veteran Member
May 5, 2007
2,164
The South of N.H.
For Sale: Used Original 1970-1976 Camaro Battery Cable CLIP, GM # 3973662, and attaching Bolt, GM # 3958062, that mounts on the frame. According to my notes I removed this clip and bolt from a Camaro in a salvage yard in Orange, MA. The clip is stamped "MR" and the hex indented washer head self-tapping bolt is 5/16"-16 X 9/16" with an anchor logo. Refer to the 1970 Camaro Assembly Manual (UPC 12, Sheet A10) as well as other other assembly manuals.

NOTE: GM # 3973662 is listed in my 1976 Chevrolet Parts Catalog (Sept. 1975, for 1976 models only) in Gr. 2.343 for 76* F, X (250, 305, 350) but not in my 1970-1975 Chevrolet Parts Catalogs. My 1977 Chevrolet Parts Catalog (March 1977, for 1976-1977 models only) lists GM # 3979355 as the cable to frame CLIP in Gr. 2.343 for 76-77 F, X (250, 305, 350)

The clip is in good condition but the black rubber/plastic coating had mostly peeled off when I cleaned it years ago and needs to be replaced. The black coating is in the bottom end. The top 1 1/8" part of the clip that with the mounting hole is not coated but it probably should be painted to prevent rust. I got these measurements from another clip that I recently sold in item #398. I have no more of these battery cable clips.

$10 for the Used Battery Cable Clip & Bolt plus shipping and Paypal fee (if applicable).
If interested or if there are any questions, SEND ME A PM and SPECIFY ITEM # 401.
Note: I do combine shipping for other parts purchased within a 2 month period.
Dave
SALE PENDING

Battery Cable CLIP & bolt (3973662 & 3958062) - 1 of 4.jpg Battery Cable CLIP & bolt (3973662 & 3958062) - 2 of 4.jpg Battery Cable CLIP & bolt (3973662 & 3958062) - 3 of 4.jpg Battery Cable CLIP & bolt (3973662 & 3958062) - 4 of 4.jpg
 
Last edited:

DCL70

Veteran Member
May 5, 2007
2,164
The South of N.H.
For Sale: Used Original engine lift brackets for 1970 Camaro Z28 models and other Chevrolet models. The brackets are stamped with the letter "M" inside a larger letter "C". The brackets are in good useable condition.

NOTE #1: These 2 brackets are the same as the 1,100 miles 1970 Z28 shown on the NastyZ28 web which appear to have the letter "M" stamped inside a larger the letter "C".
Refer to "ORIGINAL DRIVETRAIN TOPIC" article entitled "1970 Z28Camaro.com site" Engine Photos # 13, #52, #79, and #80.

$25 for the engine lift brackets plus shipping and PayPal fee (if applicable).
If interested, SEND ME A PM and SPECIF ITEM # 402.
NOTE #2:
I do combine shipping for other parts purchased within a 2 month period.

Dave
SALE PENDING
Engine Lift Brackets - 1 of 4.jpg Engine Lift Brackets - 2 of 4.jpg Engine Lift Brackets - 3 of 4.jpg Engine Lift Brackets - 4 of 4.jpg
NOTE #2
 
Last edited:

DCL70

Veteran Member
May 5, 2007
2,164
The South of N.H.
For Sale: 2 used original 1970-1981 Camaro windows crank handles with the "9717838" casting number where the chrome is in fair to good condition but the formerly "clear" plastic knobs are now "dark yellow" due to age.

One "9717838" handle with the stage coach logo and "5B" (assumed to be the 2nd week of April 1970) is from a 1970 Camaro, VIN 123970N546973 and "05D" on the trim tag (4th week of May 1970). The rivet that holds the knob on is very loose (see photo # 4).

The other "9717838" handle with the stage coach logo and "8C" (assumed to be the 3rd week of August 1980) is from a 1981 Camaro, VIN 1G1AP87K3BL136980 where "B" = 1981.

Included with the pair of 9717838 handles are the 2 retainer clips which are attached to the handles and the 2 light gray plastic 2" diameter thin "washers".

$10 for the pair of used 9717838 window crank handles plus shipping and PayPal fee (if applicable).
If interested, SEND ME A PM and SPECIFY ITEM # 404.
I do combine shipping for other parts purchased within a 2 month period.
Dave
SOLD
Handles, Window Crank 70 & 81 Camaro - 9717838 - 1 of 7.jpg Handles, Window Crank 70 & 81 Camaro - 9717838 - 2 of 7.jpg Handles, Window Crank 70 & 81 Camaro - 9717838 - 3 of 7.jpg Handles, Window Crank 70 & 81 Camaro - 9717838 - 4 of 7.jpg Handles, Window Crank 70 & 81 Camaro - 9717838 - 5 of 7.jpg Handles, Window Crank 70 & 81 Camaro - 9717838 - 6 of 7.jpg Handles, Window Crank 70 & 81 Camaro - 9717838 - 7 of 7.jpg
 
Last edited:

DCL70

Veteran Member
May 5, 2007
2,164
The South of N.H.
For Sale: 2 new aftermarket windows crank handles, Motormite part number 76910 with "clear" plastic knobs and are made in China. The date on the back side of the wrappers is 1994 and are listed for 1952-1981 GM models.

These handles are similar to the "9717838" handles used on 1970-1981 Camaro and other GM models. The arm width is wider and the curvature is slightly flatter than the "9717838" handles.

Included with the pair of aftermarket handles are the 2 retainer clips which are attached to the handles.

$10 for the pair of new aftermarket window crank handles plus shipping and PayPal fee (if applicable).
If interested, SEND ME A PM and SPECIFY ITEM # 405.
I do combine shipping for other parts purchased within a 2 month period.
Dave

Handles, Window Crank - Aftermarket by Motormite - 1 of 6.jpg Handles, Window Crank - Aftermarket by Motormite - 2 of 6.jpg Handles, Window Crank - Aftermarket by Motormite - 3 of 6.jpg Handles, Window Crank - Aftermarket by Motormite - 4 of 6.jpg Handles, Window Crank - Aftermarket by Motormite - 5 of 6.jpg Handles, Window Crank - Aftermarket by Motormite - 6 of 6.jpg
 

DCL70

Veteran Member
May 5, 2007
2,164
The South of N.H.
For Sale: Used ORIGINAL 1970 Muncie 4-Speed M20 Transmission Tag, "3952659 WB". This tag is for the Muncie M20 4-speed transmission used on 1970 Camaro models with L34, L48, and Z28 options.
Refer to the 1970 Camaro assembly Manual (UPC M20,M21,M22; Sheet A1).
This is my last Muncie transmission take that I have.

$25 for the original 3952659 tag plus shipping and Paypal fee (if applicable).
If interested, SEND ME A PM and SPECIFY ITEM # 406.
Note: I do combine shipping for other parts purchased within a 2 month period.
Dave
SALE PENDING

Transmission Tag Muncie 3952659 WB - 1 of 2.jpg Transmission Tag Muncie 3952659 WB - 2 of 2.jpg
 
Last edited:

DCL70

Veteran Member
May 5, 2007
2,164
The South of N.H.
For Sale: Used Lug Nut Wrench as shown in photos #1 - #8 that is similar to the lug nut wrenches issued to 1971-1973 Camaro models, GM # 3987070, as shown in the 1971-1973 Camaro Assembly Manuals (1971: UPC 14, Sheet 14E-1; 1972: UPC 14E, Sheet 1; 1973: UPC 14E, Sheet 2). This lug nut wrench was removed from a 1972 Buick Skylark back in the 1990's.

NOTE #1: Photos # 9 and #10 are for comparison purposes only.

Note #2:
My 1971 Chevrolet Parts Catalog (dated Sept. 1970, for 1971 models only) list GM # 3987070 as the part number for the jack handle WRENCH (3/4" hex) for 71 All in Gr. 8.820.
My 1972 Chevrolet Parts Catalog (dated Feb. 1972, for 1972 models only) list GM # 3987070 as the part number for the jack handle WRENCH (3/4" hex) for 72 All (exc. Pass.) in Gr. 8.821.

According to Chevrolet & GM Parts History for service parts sold over the counter GM # 3987070 was replaced by GM # 326740 in Nov. 1974 which was then replaced by GM # 14036400 sometime after 1981.

The lug wrench is in good useable condition but needs to be re-painted either gray or black. In photo #9, The two original 1970 Camaro lug nut wrenches and the 1972 Camaro lug wrenches were painted gray. The measured dimensions of this lug nut wrench are as follows: long section about 18", short section about 4 1/4", diagonal measures about 20 1/2" C/C, and interior angle measures about 120 degrees. There is a forged letter "O" on the lug head.

$15 for the used lug nut wrench as shown in photos #1 - #8 plus shipping cost and PayPal fee (if applicable).
If interested, SEND ME A PM and SPECIFY ITEM # 408.
Note: I do combine shipping for other parts purchased within a 2 month period.
Dave
SOLD & SHIPPED

Lug Wrench similar to GM 3987070 (71-73 Camaro) - 1 of 10.jpg Lug Wrench similar to GM 3987070 (71-73 Camaro) - 2 of 10.jpg Lug Wrench similar to GM 3987070 (71-73 Camaro) - 3 of 10.jpg Lug Wrench similar to GM 3987070 (71-73 Camaro) - 4 of 10.jpg Lug Wrench similar to GM 3987070 (71-73 Camaro) - 5 of 10.jpg Lug Wrench similar to GM 3987070 (71-73 Camaro) - 6 of 10.jpg Lug Wrench similar to GM 3987070 (71-73 Camaro) - 7 of 10.jpg Lug Wrench similar to GM 3987070 (71-73 Camaro) - 8 of 10.jpg Lug Wrench similar to GM 3987070 (71-73 Camaro) - 9 of 10.jpg Lug Wrench similar to GM 3987070 (71-73 Camaro) - 10 of 10.jpg
 
Last edited:

DCL70

Veteran Member
May 5, 2007
2,164
The South of N.H.
For Sale: Original 34 9/16" long Bumper Jack Shaft Assembly dated "0M" on the rivet head (December 1970) made by the Universal Tool Company ("UN") with original base. This jack assembly is the correct length (34 1/4" to 34 3/4") for very late 1970 and 1971-1973 Camaro models. There are no stampings on the jack base. The jack assembly was removed from an "early" 1971 El Camino. I still have the 1971 El Camino jack hook (aka load rest) but it is not part of this sale since it will not work correctly on a Camaro.
The top of the shaft is stamped "PATENT 3163925". The up-down lever is stamped "UN" along with a large "UP" with an arrow.

The bumper jack shaft is in good condition without any pitting from surface rust which I buffed off with my wire wheel. The jacking mechanism has much of its original black paint and is without any rust or rust pitting. The original finish on the shaft was yellow cadmium plating. The shaft should somehow protected from rust with yellow cadmium plating or even spray paint. The jack base is in good condition without any rust as I buffed off the surface rust with my wire wheel but obviously needs to be repainted.

I will sell the 2 parts separately or both for $75.

$60 for the used 34 9/16" long jack shaft assembly plus shipping cost and PayPal fee (if applicable).
SOLD & SHIPPED

$15
for the used 1970-1972 jack base as shown in photos #6 & #7 plus shipping cost and PayPal fee (if applicable).
Still Available

If interested, SEND ME A PM and SPECIFY ITEM # 409.
Dave

Bumper jack dated %220M%22 (Dec. 1970) w-base - 1 of 12.jpg Bumper jack dated %220M%22 (Dec. 1970) w-base - 2 of 12.jpg Bumper jack dated %220M%22 (Dec. 1970) w-base - 3 of 12.jpg Bumper jack dated %220M%22 (Dec. 1970) w-base - 4 of 12.jpg Bumper jack dated %220M%22 (Dec. 1970) w-base - 5 of 12.jpg Bumper jack dated %220M%22 (Dec. 1970) w-base - 6 of 12.jpg Bumper jack dated %220M%22 (Dec. 1970) w-base - 7 of 12.jpg Bumper jack dated %220M%22 (Dec. 1970) w-base - 8 of 12.jpg Bumper jack dated %220M%22 (Dec. 1970) w-base - 9 of 12.jpg Bumper jack dated %220M%22 (Dec. 1970) w-base - 10 of 12.jpg Bumper jack dated %220M%22 (Dec. 1970) w-base - 11 of 12.jpg Bumper jack dated %220M%22 (Dec. 1970) w-base - 12 of 12.jpg
 
Last edited:

DCL70

Veteran Member
May 5, 2007
2,164
The South of N.H.
For Sale: Used Bumper Jack Base stamped with the letter "U" for 1973 Camaro bumper jack shafts. This base is for bumper jacks made by the Universal Tool Company (stamped "UN" on the up-down lever on the jacking mechanism). This base is the same as the 1970-1972 Camaro jack bases which do not have the "U" stamping. The GM part number for the 1970-1972 as well as the 1973 jack bases is 3866476 as listed in the 1970-1973 Camaro assembly manuals.
The bumper jack base is in good condition without any pitting from surface rust but needs a re-paint.
$15 for the Used bumper jack base stamped with the letter "U" plus shipping and Paypal fee (if applicable).

If interested, SEND ME A PM and SPECIFY ITEM # 410.
Note: I do combine shipping for other parts purchased within a 2 month period.
Dave
SOLD & SHIPPED

Bumper jack base - 1973 stamped %22U%22 - 1 of 6.jpg Bumper jack base - 1973 stamped %22U%22 - 2 of 6.jpg Bumper jack base - 1973 stamped %22U%22 - 3 of 6.jpg Bumper jack base - 1973 stamped %22U%22 - 4 of 6.jpg Bumper jack base - 1973 stamped %22U%22 - 5 of 6.jpg Bumper jack base - 1973 stamped %22U%22 - 6 of 6.jpg
 
Last edited:




Latest posts

Top