N.O.S. and Used Original Parts For Sale - 2022

[DCL70]

For Sale: New Cloyes Heavy Duty Timing Set (2 gears and double roller chain) in a sealed wrapper, part # C-3023SP, for 1955-1991 SBC engines (262, 265, 267, 283, 302, 350G, H, 307, 327, 350L, and 400 w/2-bbl carb) as well as 1978-1986 V6 engines (200, 229, 262 (4.3Z)L).

The large gear has the following casting numbers: "3765412", "0019", "GM" and is stamped "6-99" and "288".
The small gear is stamped "10-97" and "289-D".
The back of the wrapper is dated 1994.

$15 for the new Cloyes H.D. Timing Set plus shipping and Paypal fee (if applicable).
If interested or if there are any questions, SEND ME A PM and SPECIFY ITEM # 461.
NOTE: I do combine shipping for other parts purchased within a 2 month period.
Dave
SALE PENDING

 

[DCL70]

For Sale: New Aftermarket Dual Exhaust System MUFFLER for 1967-1973 Camaro & Firebird models.
The overall length of the muffler (end pipe to end pipe) measures 29 1/2". The oval shell (4 3/4" X 10") length measures 23 1/2". The inlet pipes measure 2 1/4" I.D. and the outlet pipes measure 2" O.D.
The muffler has "RUMA" and "19626K" embossed on the shell as shown in photos #1, #3, and #4.
Note: Currently there is a "19626" muffler listed on Ebay for $575 for 1967-1969 Camaro models.

My 1967 Corvair-Chevy II-Chevelle-Camaro Parts Catalog (Oct. 1966) lists the following muffler part numbers in Gr. 3.701:
67 CAMARO w/dual exh. (350) exc. deep tone muffler.........3910565
67 CAMARO w/deep tone muffler........................................3910566

My 1968 Corvair-Chevy II-Chevelle-Camaro Parts Catalog (July 1968) lists the following muffler part numbers in Gr. 3.701:
67-68 CAMARO (350, 396) (exc. deep tone muffler)..............3910565
67-68 CAMARO w/dual exh. ................................................3910565
67-68 CAMARO w/deep tone muffler.....................................3910566

My 1969 Corvair-Chevy II-Chevelle-Camaro Parts Catalog (Oct. 1968) lists the following muffler part numbers in Gr. 3.701:
67-68 CAMARO (350, 396) (exc. deep tone muffler)..,...........3910565
67-68 CAMARO w/dual exh. ................................................3910565
67-68 CAMARO w/deep tone muffler.....................................3910566
69 CAMARO w/Sp. H/Per (302, 396).....................................3910566

My 1970 Chevrolet Parts Catalog (Oct. 1970) lists the following muffler part numbers in Gr. 3.701:
70 CAMARO w/4BC.............................................................3983066
70 CAMARO w/396, 454......................................................3983066

My 1971 Chevrolet Parts Catalog (Jan. 1971) lists the following muffler part numbers in Gr. 3.701:
71 CAMARO w/4BC.............................................................3996331
71 CAMARO 400 w/4BC.......................................................3996331

My 1972 Chevrolet Parts Catalog (Feb. 1972) lists the following muffler part numbers in Gr. 3.701:
72 CAMARO 350 w/4BC.......................................................3996331
72 CAMARO 402 w/4BC.......................................................3996331

My 1973 Chevrolet Parts Catalog (July 1973) lists the following muffler part numbers in Gr. 3.701:
73 CAMARO 350 w/4BC.......................................................3996331

According to Chevrolet & GM Parts History (for service parts) GM # 3910565 was replaced by GM # 3961396 in Jan. 1970 which was then replaced by GHM # 3981951 in Feb. 1972.
Also, GM # 3910566 was replaced by 3981951 sometime between Jan. 1982 & Aug. 1985 which was then discontinued.
Also, GM # 3983066 was replaced by 3996331 sometime between Jan. 1982 & Aug. 1985 which was then discontinued sometime between Aug, 1985 & Jan. 1990.

$60 for the new aftermarket muffler plus shipping cost and PayPal fee (if applicable).
If interested or if there are any questions, SEND ME A PM and SPECIFY ITEM # 462.
Dave

 

[DCL70]

For Sale: N.O.S. (New Old Stock) Window Regulator Handle Plates, GM # 4506696, as listed in GR. 10.515 in my vintage Chevrolet Parts Catalogs (see photos #6-#7). I have a total of 8 Plates, 4 in a sealed GM wrapper and 4 without the GM wrapper as shown in photos #1-#5.
The 4506696 plates are listed for 1967 and older models. The plates measure 2" in diameter and will fit on a "9717838" or a "9715291" window crank handle. The N.O.S. GM # 7731353 plates appear to be identical (see photo #8) and are listed for 1968 and newer models.
Note: Photo #8 was copied from Ebay for comparison purposes only.
GM # 4506696 was discontinued in the early 1980's and replaced by GM # 7731353.

$10 for a pair of 4506696 Plates plus shipping and Paypal fee (if applicable).
If interested or if there are any questions, SEND ME A PM and SPECIFY ITEM # 463.
NOTE: I do combine shipping for other parts purchased within a 2 month period.
Dave
SALE PENDING on One Pair of 4506696 Plates.
SALE PENDING on another Pair of 4506696 Plates.
SALE PENDING on the last 4 4506696 Plates.

 

[DCL70]

For Sale: Possibly N.O.S. (New Old Stock) or just new 5/16"-18 X 7/8" bolts with attached 3/4" washers and 1/2" indented hex heads, GM # 3846202. The 3846202 bolt is listed in the 1970 Camaro Assembly Manual as "SCREW" or "SCREW ASM" in the following pages: UPC 1, Sheet B6; UPC 9, Sheet A4; UPC 11/13, Sheet B3; UPC 12, Sheet A8; and UPC D80, Sheet A2. The bolt heads are marked with a large letter "C" (see photo #2) with 3 radial lines (grade 5). I bought these bolts at a swap meet many years ago and I assume that they are New Old Stock but it is possible that they are reproductions made by AMK Products, part # B-11709. AMK Products was founded in 1990. I do not remember if I bought these bolts before or after 1990.

$1 for each bolt plus shipping and Paypal fee (if applicable).
If interested or if there are any questions, SEND ME A PM and SPECIFY ITEM # 464 and how many bolts that you want.
NOTE: I do combine shipping for other parts purchased within a 2 month period.
Dave

 

[DCL70]

For Sale: Reproduction O.S. 1970 Camaro Jacking Instructions ("1-20-70 PART NO. 3990417") in the sealed clear wrapper that I bought in July 2004. The sticker is still in the original 8.5" X 8.25" cardboard that I received in the mail dated July 08, 2004.
The sticker is in excellant condition.

$5 for reproduction 1970 Camaro jacking instruction sticker plus shipping and Paypal fee (if applicable).
If interested or if there are any questions, SEND ME A PM and SPECIFY ITEM # 465.
NOTE: I do combine shipping for other parts purchased within a 2 month period.
Dave
SALE PENDING as of 2:57 PM ET on 12/05/2022.

 

[DCL70]

For Sale: Original and Reproduction 1968 Camaro Bumper Jack Brackets listed as GM # 3919088 in the 1968 Camaro Assembly Manual (UPC 10, Sheet A2) and in my 1968 Corvair-Chevy II-Chevelle-Camaro Parts Catalog (July 1968) on Gr. 8.820 and described as "jack load rest BRACKET ASSY."
Note #1: The original bracket is on the right side of each photo and is missing the pin.
Note #2: The reproduction is on the left side of each photo.
Note #3: The words "CAMARO 1968 UN" are stamped on the front of the reproduction bracket (see photo #1) and are stamped on the back of the original bracket (see photo #7).
$10 for each bracket plus shipping and Paypal fee (if applicable).
If interested or if there are any questions, SEND ME A PM and SPECIFY ITEM # 466 and which bracket.
NOTE: I do combine shipping for other parts purchased within a 2 month period.
Dave


4

 

[DCL70]

For Sale: Reproduction 1967 Camaro Bumper Jack Bracket listed as GM # 3919170 in the 1967 Camaro Assembly Manual (UPC 10, Sheet A2). The REVISION RECORD lists "WAS 3893828 BRACKET" on 11-9-67.
My 1967 Corvair-Chevy II-Chevelle-Camaro Parts Catalog (Oct. 1966) in Gr. 8.820 lists the 67 Camaro jack load rest BRACKET ASSY. as GM # 3893828.
I'm not sure if this is an "early" 1968 or "late" 1968 Camaro bracket.
The words "CAMARO 1967 UN" are stamped on the front of the reproduction bracket.

$10 for the reproduction bracket plus shipping and Paypal fee (if applicable).
If interested or if there are any questions, Send ME A PM and SPECIFY ITEM # 467.
NOTE: I do combine shipping for other parts purchased within a 2 month period.
Dave

 

[DCL70]

For Sale: N.O.S. (New Old Stock) Distributor Contact Points & Condenser Uni-Set, GM # 1876600 (Delco Remy # D1007) in Gr. 2.384 in my 1974 Chevrolet Parts Catalog (July 1974 for 1973-1974 models only) for All 1974 Chevrolet models with 8 cyl. engines and described as "CONTACT ASSY., w/capacitor".
The bottom of the plate is stamped "Delco Remy" and "PAT. 3646301". The end off the condenser is stamped "Delco Remy" and "MADE IN USA".

As usual, potential buyers should do their own research when buying "correct" or replacement parts for their car.
$20 for the N.O.S. Distributor Points & Condenser Uni-Set plus shipping and Paypal fee (if applicable).
If interested or if there are any questions, SEND ME A PM and SPECIFY ITEM # 468.
NOTE: I do combine shipping for other parts purchased within a 2 month period.
Dave

 

[DCL70]

For Sale: 2 Door Window Guide Rollers, reproductions of GM # 9820729 as listed in by 1970 and 1981 Chevrolet Parts Catalogs for 1970-1981 Camaro models in Gr. 10.792. Two rollers are required per car. Each roller measures about 1.8" in total length with the white nylon wheel measuring about 0.95" in diameter and about 0.32" thick with the overall width measuring about 0.40" thick. The threads size is 1/4"-20.

As usual, potential buyers should do their own research when buying "correct" or replacement parts for their car.
$20 for the pair of reproduction rollers plus shipping and Paypal fee (if applicable).
If interested or if there are any questions, SEND ME A PM and SPECIFY ITEM # 469.
NOTE: I do combine shipping for other parts purchased within a 2 month period.
Dave
SOLD & SHIPPED

 

[DCL70]

Used 3/4" Hex head Lug Nut Wrench, GM # 3909176, that was removed from a 1969 Chevrolet. It was also issued to other 1969 Chevrolet models like the 1969 Camaro, 1969 Chevrolet, and 1969 Chevelle.

GM # 3909176 is listed as the lug wrench for ALL models in my 1967 Chevrolet Parts Catalog (July 1967), my 1968 Chevrolet Parts Catalogs (Oct. 1967 & July 1968), and my 1969 Chevrolet Parts Catalogs (Oct. 1968 & May 1969) in Gr. 8.821.

I traced the 1969 Chevrolet lug wrench on a paper to determine some of the measurements a bit more accurately. The measured dimensions of this lug nut wrench are as follows: long section about 16", short section about 4", diagonal measures about 18 5/8" C/C, and interior angle measures about 125 degrees. There is a forged letter "O" on the lug head as shown in photo #2. The chisel end of the lug wrench has a unique curve on it as shown in photo #6.

This used lug wrench was identical to an NOS 3909176 lug wrench that I sold on Ebay years ago for $100 as well as a used 3090176 lug wrench from a 1969 Nova that I recently sold on Ebay for $40 minus Ebay fees.

According to Chevrolet Parts History for service parts sold over the counter GM # 3909176 was replaced by GM # 3987070 in Dec. 1971.

My 1967, 1968, 1969, and 1970 Camaro Assembly Manuals do not list a part number for the lug nut wrench, but rather they all list a part number for the WRENCH CHART, GM # 3899546.

My 1971, 1972, and 1973 Camaro Assembly Manuals list GM # 3987070 as the part number for the lug nut wrench.

There are no lug wrench part numbers listed at all in my 1970 Chevrolet Parts Catalogs (Sept. 1969, Nov. 1969, Jan. 1970, and Oct. 1970).

GM # 3987070 is listed as the lug wrench for 1971-1972 models (with 3/4" hex) in my 1971-1972 Chevrolet Parts Catalogs (Sept. 1970, Jan. 1971, and Feb. 1972) in Gr. 8.821.

$35 for the used 3909176 lug nut wrench plus shipping and Paypal fee (if applicable).
If interested or if there are any questions, SEND ME A PM and SPECIFY ITEM # 470.
NOTE: I do combine shipping for other parts purchased within a 2 month period.
Dave