N.O.S. and Used Original Parts For Sale - 2022

[DCL70]

Almost new GM 3/4" Hex head Lug Nut Wrench, GM # 15707224 or GM # 15185379, that was I removed from a 2000 S10 Blazer about 15 or 20 years ago in a salvage yard. The lug wrench has 99.9% of its original black pain. Based on the information that I found on the web after I took the photos I would say it is GM # 15707224 as my 2001 Mitchell Collision Estimating & Reference Guile for GM models (Oct. 2001) lists GM # 15707224 as the lug wrench for 1995-2002 S10 Blazers and GM # 15707224 is interchangeable with GM # 15185379 as shown in photo #6.

I traced the lug wrench on a paper to determine some of the measurements a bit more accurately. The measured dimensions of this lug nut wrench are as follows: long section about 16 7/8", short section about 5", diagonal measures about 18 5/8" C/C, and interior angle measures about 103 degrees. There is a forged letter "O" on the lug head.

$10 for the almost new lug nut wrench plus shipping and Paypal fee (if applicable).
If interested or if there are any questions, SEND ME A PM and SPECIFY ITEM # 471.
NOTE: I do combine shipping for other parts purchased within a 2 month period.
Dave

 

[DCL70]

Used 1971-1978 Camaro Radio Knobs, GM # 3986872 (outer volume knob) and GM # 3986829 (outer tuning knob) as listed in my 1981 vintage Chevrolet Parts Catalogs in Gr. 9.649 and my 1971, 1972, and 1973 Camaro Assembly Manuals (UPC U63, Sheet 12L-1; UPC 12L, Sheet 11; and UPC 12L. Sheet 9.
The 2 knobs are in good condition.

$10 for the pair of radio knobs plus shipping and Paypal fee (if applicable).
If interested or if there are any questions, SEND ME A PM and SPECIFY ITEM # 472.
NOTE: I do combine shipping for other parts purchased within a 2 month period.
Dave

 

[DCL70]

Used 1971-1978 Camaro Radio Tone Control Knob, GM # 3980197, that mounts behind the 3986872 outer volume knob on the left side of the radio as listed in my 1981 vintage Chevrolet Parts Catalogs in Gr. 9.649 and my 1971, 1972, and 1973 Camaro Assembly Manuals (UPC U63, Sheet 12L-1; UPC 12L, Sheet 11; and UPC 12L. Sheet 9.
The knob is in very good condition.

$5 for the 3980197 radio knob plus shipping and Paypal fee (if applicable).
If interested or if there are any questions, SEND ME A PM and SPECIFY ITEM # 473.
NOTE: I do combine shipping for other parts purchased within a 2 month period.
Dave

 

[DCL70]

For Sale: Used Distributor Weights, GM # 1881371, for 1970 Z28 1112019 Distributors as well as other distributors listed in photo #3.
The 2 weights were removed from a 1966 Chevrolet V8 distributor stamped "111150" dated "5 K5" (Oct. 5, 1965).

My 1970 Chevrolet Parts Catalog (Oct. 1970) lists GM # 1881371 in Gr. 2.388 for the following models:
1964-1970 All models (230, 250, 283, 327, 350, 396)
1967-1968 Pass. w/Sp. H/Per. (427)

The 2 weights are in very good useable condition without any rust or pitting. The 2 weights together weight about 35 grams or about 17.5 grams each.

$10 for the 2 Used 1881371 Distributor Weights plus shipping and PayPal fee (if applicable).
Note: I do combine shipping for other parts purchased within a 2 month period.
If interested, SEND ME A PM and SPECIFY ITEM # 474.
Dave

 

[DCL70]

For Sale: Used Original "Early" 1980 Camaro 14" X 7" steel wheel stamped "K 1 9", "9", (valve hole), "UC". This is a Kelsey-Hayes ("K") wheel made in Romulus, MI, ("1") on September 19, 1979. According to my 1975, 1976, 1977, and 1981 Chevrolet Parts Catalogs in Gr. 5.803 the "UC" wheel is GM # 362052 for use on the following:
75 Nova, Camaro (exc. rally wheel)
76-77 FQ (exc. rally wheel)
77-79 F, X
80-81 F
My 1981 Chevrolet Parts Catalog (April 1981) for models thru 1975 lists GM # 362052 (stamped "UC") for use on the following:
69 Chevy II, Camaro (S.S.)(exc. mag. type wheel, rally wheel)
70 Nova (S.S.)(exc. mag. type wheel, rally wheel)
70 Camaro (350, 396 4BC)(exc. rally wheel)
71-75 Camaro (exc. rally wheel)
71-72 Nova (Spt. Cpe.)(exc. rally wheel)
73-75 Nova (exc. rally wheel)

According to GM Parts History for service parts:
GM # 3975667 (stamped "CL") was replaced by GM # 334397 (stamped "EM") in December 1974 which was then replaced by GM # 362052 (stamped UC" as mentioned above) sometime between Sept 1976 and Jan. 1978. I have compared this "UC" to my used and N.O.S. 14" X 7" "CL" wheels that I once owned and see no difference except for the stampings.

As shown in the photos this wheel is in good condition and just needs to be cleaned , sanded to remove surface rust areas, and then re-painted.

$30 for the "UC" wheel plus shipping and PayPal (if applicable).
If interested, SEND ME A PM and SPECIFY ITEM # 475.
SALE PENDING subject to shipping cost.
Dave

 

[DCL70]

For Sale: Two ORIGINAL 1970-1973 Camaro with dual exhaust Tailpipe Hanger Assemblies, GM # 3983053, as shown in the 1970 Camaro Assembly Manual (UPC 8, Sheet A2 and UPC L48, Sheet C1). Both hangers have a large letter "V" stamped on the front (see photos #5 & #6).

The hanger of the left is in very good condition. Years ago I cleaned it with my wire wheel and painted it with a spray paint that looks like bare steel. The hanger on the right is in fair condition with evidence of rust pitting after I cleaned it with my wire wheel. It should be media blasted with any pitting filled with "Metal-2-Metal" or other body filler.

Included are four original 5/16"-18 X 1" bolts with pointed ends, GM # 3975550, as shown in the 1970 Camaro Assembly Manual (UPC 8, Sheet A2) as well as four 5/16"-18 X 1 1/8" aftermarket bolts with blunt ends as shown in photo #6.

The rubber insulators are in poor condition as shown in the photos. I have other Camaro exhaust hangers soon to be added to the Swap Meet Section.

$40 for both tailpipe hangers with 8 bolts plus shipping cost and PayPal fee (if applicable).
If interested, SEND ME A PM and SPECIFY ITEM # 476.
Dave
SALE PENDING

 

[DCL70]

For Sale: Two REPRODUCTION 1970-1973 Camaro models with dual exhaust Muffler Hanger Assemblies. The aftermarket full threaded 5/16"-18 X 2 1/2" bolts have the letters "LE" with 3 radial line segments as well as a removable lock washer. There are no stampings on the hangers.
The hangers and bolts are in excellent condition as shown in the photos.
I have other Camaro exhaust hangers soon to be added to the Swap Meet Section.

$40 for the pair of reproduction hangers with bolts plus shipping cost and PayPal fee (if applicable).
If interested, SEND ME A PM and SPECIFY ITEM # 477.
Dave

 

[DCL70]

For Sale: N.O.S. Clutch Fork Push Adjusting Rods GM # 340690 for 1970-1974 and 1975-1981 Camaro models with 8 cyl. engines and manual transmissions. The rod has the dark phosphate coating.
Refer to 1970 Camaro Assembly Manual (UPC 7, Sheet C3) and other 1971-1981 Camaro Assembly Manuals.

The 1970-1974 Camaro threaded rod, GM # 3840843 is 4 3/16" or 4.19" long. These 1975-1981 threaded rods, GM # 340690 are each 4.70" long. The difference seems to be only the length.
According to my Chevrolet Parts History Manual GM # 3840843 was discontinued in Sept. 1974 and replaced by GM # 340690 for parts sold over the counter.
As far as I know these are that last 2 N.O.S. 340690 Rods that I have. I recently found these is a box of miscellaneous NOS parts in my garage attic.

$12 for each NOS 340690 rod plus shipping and Paypal fee (if applicable). The GM wrapper goes with the first rod sold.
If interested, SEND ME A PM and SPECIFY ITEM # 478.
To save on shipping costs I combine shipping with other parts purchased from me.
Dave
SALE PENDING on Both NOS 340690 rods

 

[DCL70]

For Sale: Two N.O.R.S. (New Old Replacement Stick) 1970-1981 Camaro with dual exhaust Tailpipe Hanger Assemblies, GM Goodwrench # 12357806. I believe that these Goodwrench hangers were actually made by the Walker Manufacturing Company that makes mufflers and tailpipes for GM.
The hangers are in excellent condition.
$10 for both Goodwrench tailpipe hangers plus shipping cost and PayPal fee (if applicable).
If interested, SEND ME A PM and SPECIFY ITEM # 479.
Dave

 

[DCL70]

For Sale: Used Original 1970-1976 Camaro Battery Cable Clip, GM # 3973662, and attaching Bolt, GM # 3958062, that mounts on the frame. The hex indented washer head self-tapping bolt is 5/16"-16 X 9/16" with a large letter "C". Refer to the 1970 Camaro Assembly Manual (UPC 12, Sheet A10) as well as other other assembly manuals.

NOTE: GM # 3973662 is listed in my 1976 Chevrolet Parts Catalog (Sept. 1975, for 1976 models only) in Gr. 2.343 for 76* F, X (250, 305, 350) but not in my 1970-1975 Chevrolet Parts Catalogs. My 1977 Chevrolet Parts Catalog (March 1977, for 1976-1977 models only) lists GM # 3979355 as the cable to frame CLIP in Gr. 2.343 for 76-77 F, X (250, 305, 350)

The clip is in good condition along with its original black rubber/plastic coating.

$10 for the Used Battery Cable Clip & Bolt plus shipping and Paypal fee (if applicable).
If interested or if there are any questions, SEND ME A PM and SPECIFY ITEM # 480.
Note: I do combine shipping for other parts purchased within a 2 month period.
Dave
SALE PENDING