N.O.S. and Used Original Parts For Sale - 2023

[DCL70]

For Sale: Original 1975-1981 Camaro/Firebird passenger side seat tracks. The seat tracks are in good useable condition but probably should be dis-assembled, cleaned, re-greased, and then re-assembled but that is up to the buyer. I bought theses seat tracks at a swap meet decades ago.

My Dec. 1983 Chevrolet Parts Catalog lists GM # 1724571 in Gr. 11.561 as the ADJUSTER, PASS. SEAT OUTER (MANUAL) for 76-81 F w/A51 and GM # 1724574 as the ADJUSTER, PASS. SEAT OUTER (INNER) for 76-81 F w/A51. Option "A51" = front bucket seats.

$50 for the passenger side seat tracks plus shipping and Paypal fee (if applicable).
If interested or if there are any questions, SEND ME A PM and SPECIFY ITEM # 61.
Dave
SOLD & SHIPPED

 

[DCL70]

For Sale: Original 1975-1981 Camaro/Firebird driver side inner seat track. The driver's side inner seat track is in good useable condition but probably should be dis-assembled, cleaned, re-greased, and then re-assembled but that is up to the buyer. I bought this seat track at a swap meet decades ago.

My Dec. 1983 Chevrolet Parts Catalog lists GM # 1652303 in Gr. 11.561 as the ADJUSTER, DRIVER SEAT INNER (MANUAL) for 76-81 F w/A51.
I do not have the DRIVER SEAT OUTER ADJUSTER, GM # 1652301.

Option "A51" = front bucket seats.

$25 for the driver side inner seat track plus shipping and Paypal fee (if applicable).
If interested or if there are any questions, SEND ME A PM and SPECIFY ITEM # 62.
Dave
SOLD & SHIPPED

 

[serpent710]

For Sale: Original 1975-1981 Camaro/Firebird passenger side seat tracks. The seat tracks are in good useable condition but probably should be dis-assembled, cleaned, re-greased, and then re-assembled but that is up to the buyer. I bought theses seat tracks at a swap meet decades ago.

My Dec. 1983 Chevrolet Parts Catalog lists GM # 1724571 in Gr. 11.561 as the ADJUSTER, PASS. SEAT OUTER (MANUAL) for 76-81 F w/A51 and GM # 1724574 as the ADJUSTER, PASS. SEAT OUTER (INNER) for 76-81 F w/A51. Option "A51" = front bucket seats.

$50 for the passenger side seat tracks plus shipping and Paypal fee (if applicable).
If interested or if there are any questions, SEND ME A PM and SPECIFY ITEM # 61.
Dave

View attachment 158549 View attachment 158550 View attachment 158551 View attachment 158552 View attachment 158553 View attachment 158554 View attachment 158555 View attachment 158556 View attachment 158557 View attachment 158558

i WILL TAKE THEM ALL SHIPPING TO 33309 PLEASE

 

[DCL70]

For Sale: Used LH Upper Control Arm from a 1970 Camaro, GM # 3964827, which is also listed in my vintage Chevrolet parts catalogs for 1971 and 1972 Camaro models. The stampings are "A" and "6"" (photo #2) and larger letter "E" & "0" (photo #3). I assume that the "A", "6", and "0" are a date code January 6, 1970, not sure about the meaning of the larger letter "E". There is also a "F7T" stamping with smaller letters.
Attached to the control arm is the shaft, GM # 3986036, which is stamped with the letter "A" and also listed for 1970-1972 Camaro models.
The ball joint which seems to be original because it is riveted to the arm is stamped with the letter "I" and the number "15" (see photo #4). The rubber cover on the ball joint has the GM # "9740081" and "10-40" (see photo #12).

The upper control arm and shaft are in good restorable condition but should be dis-assembled and media blasted before rebuilding with a new ball joint and bushings.

According to GM Parts History Catalog (for service parts sold over the counter) the Upper Control Arm Assembly, GM # 3964827, was replaced in Oct. 1973 with GM # 335893. GM # 331277 (listed for 1973 Camaro models in my 1973 Chevrolet Parts Catalog) was replaced by GM 335893 in Sept. 1974 which was then replaced by GM # 351217 and then replaced by GM # 14002389 and finally replaced by GM # 14034861. I have no idea what the differences are based on the part number supersessions.

According to GM Parts History Catalog (for service parts sold over the counter) the Shaft, GM # 3986036, was replaced in Mar. 1974 with GM # 6259679 which was then replaced by GM # 356852.

$25 for the 3964627 1970-1972 LH Upper Control Arm Assembly dated "A 6 0" as shown in the photos w/ 3986036 shaft plus shipping and Paypal fee (if applicable).
If interested, SEND ME A PM and SPECIFY ITEM # 64.
Dave
SOLD & SHIPPED

 

[DCL70]

For Sale: Used RH Upper Control Arm from a 1970 Camaro, GM # 3964828, which is also listed in my vintage Chevrolet parts catalogs for 1971 and 1972 Camaro models. The stampings are "D" and "1"" (photo #2) and larger letter "E" & "0" (photo #3). I assume that the "D", "1", and "0" are a date code April 1, 1970, not sure about the meaning of the larger letter "E". There is also a "E45" stamping with smaller letters.
Attached to the control arm is the shaft, GM # 3986036, which is stamped with the letter "P" and also listed for 1970-1972 Camaro models.
The ball joint which seems to be original because it is riveted to the arm is stamped with the letter "I" and the number "11" (see photo #4). The rubber cover on the ball joint has the GM # "9740081" and "10-39" (see photo #11).

The upper control arm and shaft are in good restorable condition but should be dis-assembled and media blasted before rebuilding with a new ball joint and bushings.

According to GM Parts History Catalog (for service parts sold over the counter) the Upper Control Arm, GM # 3964828, was replaced in Oct. 1973 with GM # 331278 in May 1974 which was then replaced by GM # 335894 and then replaced by GM # 351218 and then replaced by GM # 14002390 and finally replaced by GM # 14011216. I have no idea what the differences are based on the part number supersessions.

According to GM Parts History Catalog (for service parts sold over the counter) the Shaft, GM # 3986036, was replaced in Mar. 1974 with GM # 6259679 which was then replaced by GM # 356852.

$25 for the 3964628 1970-1972 LH Upper Control Arm Assembly dated "D 1 0" as shown in the photos w/ 3986036 shaft plus shipping and Paypal fee (if applicable).
If interested, SEND ME A PM and SPECIFY ITEM # 65.
Dave
SOLD & SHIPPED

 

[DCL70]

For Sale: Used original trunk lid from a 1970 Camaro, GM # 9819030, that I bought on Ebay from someone in California back in the 1990's.
It appears the the trunk lid was originally green then repainted brown. The small holes for the "Camaro By Chevrolet" emblem were spot welded and then ground flat to match the top surface (see photo #2) and then painted with gray primmer paint. There is a "T15" stamping (see photo # 11) on the bottom side of the lid where I believe the "T" indicates the Grand Blacc, MI, plant where it was made and "15" indicates the 15th week of the year (See "1970 Trunk Emblem" thread dated May 5, 2011, Item # 20).

There is no significant rust in the painted area, The top side is primer paint (by the previous owner, I assume), however, you can see surface rust when you look thru the various factory holes on the bottom side because the bare steel was never painted inside. Shipping can be quite expensive. I have 10 more photos of the trunk lid.

$100 for the used trunk lid plus shipping and Paypal fee (if applicable).
If interested, SEND ME A PM and SPECIFY ITEM #66.
Dave
SOLD & SHIPPED

 

[DCL70]

For Sale: Used RH Upper Control Arm from a 1970 Camaro, GM # 3964828, which is also listed in my vintage Chevrolet parts catalogs for 1971 and 1972 Camaro models. The stampings are "D21" (photo #2) and "B" & "0" (photo #3). I assume that the "D", "21, and "0" are a date code April 21, 1970, not sure about the meaning of the letter "B".
Attached to the control arm is the shaft, GM # 3986036, also listed for 1970-1972 Camaro models.

Both the upper control arm and shaft are in good restorable condition but should be disassembled, media blasted, painted, and then reassembled with new bushings.

According to GM Parts History Catalog (for service parts sold over the counter) the Upper Control Arm, GM # 3964828, was replaced in Oct. 1973 with GM # 331278 in May 1974 which was then replaced by GM # 335894 and then replaced by GM # 351218 and then replaced by GM # 14002390 and finally replaced by GM # 14011216. I have no idea what the differences are based on the part number supersessions.

According to GM Parts History Catalog (for service parts sold over the counter) the Shaft, GM # 3986036, was replaced in Mar. 1974 with GM # 6259679 which was then replaced by GM # 356852.

$25 for the 3964628 1970-1972 RH Upper Control Arm w/ 3986036 shaft plus shipping and Paypal fee (if applicable).
If interested, SEND ME A PM and SPECIFY ITEM # 67.
Dave
SOLD and SHIPPED

 

[DCL70]

For Sale: Used LH Upper Control Arm from a 1970 Camaro, GM # 3964827, which is also listed in my vintage Chevrolet parts catalogs for 1971 and 1972 Camaro models. The stampings are "A" and "29"" (photo #2) and "D" & "0" (photo #3). I assume that the "A", "29, and "0" are a date code January 29, 1970, not sure about the meaning of the letter "D".
Attached to the control arm is the shaft, GM # 3986036, also listed for 1970-1972 Camaro models.

The upper control arm is in fair condition because of the heavier rust but the shaft are in good restorable condition.

According to GM Parts History Catalog (for service parts sold over the counter) the Upper Control Arm, GM # 3964827, was replaced in Oct. 1973 with GM # 335893. GM # 331277 (listed for 1973 Camaro models in my 1973 Chevrolet Parts Catalog) was replaced by GM 335893 in Sept. 1974 which was then replaced by GM # 351217 and then replaced by GM # 14002389 and finally replaced by GM # 14034861. I have no idea what the differences are based on the part number supersessions.

According to GM Parts History Catalog (for service parts sold over the counter) the Shaft, GM # 3986036, was replaced in Mar. 1974 with GM # 6259679 which was then replaced by GM # 356852.

$15 for the 3964627 1970-1972 LH Upper Control Arm w/ 3986036 shaft plus shipping and Paypal fee (if applicable).
If interested, SEND ME A PM and SPECIFY ITEM # 68.
Dave
SOLD and SHIPPED

 

[DCL70]

Moved:

 

[CamarosRus]

Dave, Do you have specs/drawings showing the difference between the Stainless Capped
70, 71, 72 , 73 Bumper Bolts .............Head Diameters ?????