Twin Turbo Tall Deck

Rustbucket350

Veteran Member
Sep 4, 2013
1,367
Oviedo, Florida
Tank is cut and deburred. Ran out of daylight. Took forever to flush the shavings.

20221123-180805.jpg


20221123-202053.jpg


I did make my radiator and core support brackets.
 
Last edited:

Rustbucket350

Veteran Member
Sep 4, 2013
1,367
Oviedo, Florida
For sure, need to find a place to mount this.
20221123-215836.jpg


That will take about 3 seconds once I can actually jack the car up. It is very low. That is fine. I'm going to put it up on jackstands. I'll do the fuel system, and exhaust.
 

Rustbucket350

Veteran Member
Sep 4, 2013
1,367
Oviedo, Florida
Getting the car up in the air is not the issue. Time. I just don't have it. The exhaust actually is under the car and those flex pipes are plenty long enough to connect. It does have race bullet glass packs with an x pipe. It's ok. It was very loud with a small block. Should flow well with this.
 
Last edited:

Rustbucket350

Veteran Member
Sep 4, 2013
1,367
Oviedo, Florida
Well guys, I didn't want to spoil the surprise but it looks like next week I'm going to have a video of something to actually show for this ridiculously time consuming (and fun) project. In the meantime, I have some things to button up.
 

biker

Veteran Member
Dec 7, 2014
5,563
Canada
Well guys, I didn't want to spoil the surprise but it looks like next week I'm going to have a video of something to actually show for this ridiculously time consuming (and fun) project. In the meantime, I have some things to button up.
Waiting patiently. Burnout please.
 

Rustbucket350

Veteran Member
Sep 4, 2013
1,367
Oviedo, Florida
All that's left is to mount the pump, make some fuel lines out of the 50 foot braided roll I ordered, make a fuel rail, and for now, I'm just going to set the battery in the truck. I'll sort out the box later.
 




Top