Separate names with a comma.
Discussion in 'Swap Meet Section' started by bkmont, Jan 30, 2021.
Looking for a set of used ones. The ones at the transverse muffler.
They are going to be very hard to find. But a member makes exact reproduction of them. They are coated in zinc plating to last longer. I have a set if you are interested in them. I have pictures taken with throw away Camera which are not as clear as Cell or smart phone would be. I also have NOS brackets that have rubber inside that bolt to the welded bracket on frame. #3972214. But if you want the zinc set it has that part included too.
Member jacsey 70z Jack Seymour used to make them. I got a set from him a few years ago. Good stuff. He sold his 70z into the Brothers Collection, so not sure if he is around much anymore.
Yes that is the set I have too. I never used it. My 1970 SS 396 numbers matching L-34 had a true dual exhaust system with dual mufflers and 2 1/2 inch diameter with 2 inch tailpipes. If member BKmont wants it I will sell it to him.
I sent a IM to Jack Seymour inquiring about a set.
I have a set of used 3972214 muffler hangers as well as a used set of 3983053 tailpipe hangers in my collection to sell. I will sent you a PM with some photos later today.
You may want to contact Joey Gray in North Carolina. He sells the complete transverse tailpipe and muffler system and may have the exhaust hangers for SS and Z28 Camaros. His cell phone number is 336-764-8856. Good luck, George
Anyone have pics of these hangers?
Page #5 here--> https://nastyz28.com/threads/transverse-muffler-exhausts.174452/page-5
Attached is a photo of a pair of original GM 3972214 hangers with original bolts # 3972221 on the top and a pair of reproduction hangers. Note that the bolt head of the 3972221 bolts have a different style and have the letter "E" inside a circle with 3 radial line segments. The lock washers on the original bolts are not removable. The bolts on the reproduction hangers have the standard type bolt head with the letters "EL" and 3 radial line segments and the lock washers are removable. The quality of the reproduction hangers is very good.
I do not have the upper clamp # 3983040 nor the "early" lower clamp # 3983050 or its replacement # 3992572 as per the 1970 Camaro AIM.