I saw that episode. They also showed the front end conversion in a really detailed way. The only tough part about the conversion is the $$$. Still not sure you would come out ahead over just buying an early 2nd gen, although they are getting harder to find.
That's what it seems to be. I will keep studying the grounds and see if I can trace it down. There must be one under the dash as well.
I also noticed that my parking lights come on when the brake pedal is depressed so maybe that has something to do with it
Okay so I rewired that side marker light but it didn't fix the problem. I cleaned the grounds in the front. The best I can get out of the wiring diagram is that the turn signal shares a ground with the corresponding head light. So I found that ground and gave it the brush. Still a dim running...
So up by the front turn signal I noticed that the black wire (assuming ground) running to the side marker light was completely sheared. Soldering gun is heating up right now. Will let you know if this helps my problem
Hello Camaro Wizards,
I am having a problem with my turn signals doing nothing! When I use my turn signal switch there is no noise or any illumination. The lights do not light up although both front bulbs light up if I turn my running lights on although the drivers side is noticeably more dim...
I have a stack of nhra related stickers and I’m think of throwing some on my 1975 Camaro. I was just wondering who here has stickered up their cars? Pics would be great. I don’t want to over do it but I have seen some cars that look good with some. My Camaro is no show car so I think it could...
Hey guys! Thanks for all the responses. I bypassed the wire and it started so I found some wiring diagrams on here and got busy. Turns out that under my dash the purple starter wire was just wrapped around a bare section of a purple with white strip wire. Kinda makes me nervous about what else I...
Hey guys so I’ve been making great progress on my ‘75 Camaro but I had a trans leak. I pulled the header off and replaced the dipstick tube seal and when I put it all back I pinched the purple starter wire on the bell housing bolt I couldn’t get the car to start so I pulled the wire off and...