Jegs headers

[oledave60]

Anyone have any experience with these? They are about half the cost of Hedman.

http://www.jegs.com/i/JEGS-Performance-Products/555/30050/10002/-1

 

[77camarottop]

have used them on several cars no issues.

 

[warped]

I believe the Jegs branded headers are made by Flowtech.

 

[CorkyE]

I had a set a few years ago, they were okay but not of the same quality as the current Hooker's I have now. Metal was thinner on pipes and flange, and welds were not as good. They did last for about 4 years though, and most likely their quality has improved since.

 

[APEowner]

I've got the big block version in my car. They fit fine and are holding up OK.

 

[oledave60]

i am doing an auto to manual swap and have had Hedman shorty headers for the last few years. As my son and I were trying to get everything back together we found out these headers will not clear the z-bar.

Out of money and patience looking for something cheap that will fit without modification.

73 350, Thanks, Dave

 

[Cuzz]

I have had very good luck with anything that is branded for both Jegs and Summit and Im pretty sure most, if not all the branded products, are built for them by the major brands.

 

[oledave60]

I just got an email from a Jegs tech and he says these will fit a 4 speed and clear all linkage with no mods. So I ordered, stay tuned.

 

[Johnny Blaze]

I've got the big block version in my car. They fit fine and are holding up OK.

What pipe size? I believe they list two. I was thinking about the 2" version.

 

[APEowner]

What pipe size? I believe they list two. I was thinking about the 2" version.

I've got 1 3/4" primaries on mine which are a bit small for the 469 but it makes 600 HP at the flywheel on the dyno.