OER header panel fit.

[haroldpo6]

New header panel fits good. Summit replaced panel to my house in less than 24hrs and will send UPS back out to pick up returned one.

I tried to send new pics but having no luck with this site, pain in the !!!

 

[badazz81z28]

I noticed one little thing that might make a difference with the fitment of the trim ring. The trim is installed wrong. The cut outs for the adjuster should be at 12 o'clock and 9 o'clock position on the passenger side and 12/3 on the other side.

G

You can totally see it's bent.

 

[1971CamaroGuy]

You were able to send that stuff back with primer on them?

 

[1971CamaroGuy]

I noticed one little thing that might make a difference with the fitment of the trim ring. The trim is installed wrong. The cut outs for the adjuster should be at 12 o'clock and 9 o'clock position on the passenger side and 12/3 on the other side.

G

Your correct, I had a gap similar to that when I put my trim ring on, freaked me out until I rotated it correctly. Mine had a similar gap on an OE piece.

 

[haroldpo6]

You were able to send that stuff back with primer on them?

I told the guy about the primer, he said he would send me a new one anyway.