This is my cam!

[volsfan]

So this is the cam I've finally settled on after much debate. Thanks to all that helped me decide. This is your last chance to talk me out of it so speak now or forever hold your peace lol. I'll list me specs again so you can make an educated objection. http://www.summitracing.com/parts/lun-20120711

350 bored .040
approx 10.3 to 1 compression
vortec heads with guides cut down for clearance
Edelbrock Performer RPM intake
650 dbl pumper
373 gears
4 speed tranny

Looking to win the "redlight to redlight" battle and might see some occasional track time. I like a little "lumpy idle" but I also want my power brakes to work.

 

[Bonz78]

looks good..nice street cam

 

[Notalent]

Nice cam, should get you in the 365-370HP/415TQ range.

 

[AJ_72]

With that rear end, that lift and a somewhat mild duration combined with a 4 spd., your tires are going to hate you. LOL

 

[krabben1]

No,no no.I have seven other cams for you to ponder,lol!

 

[rockymountainz]

I was debating on the same cam or the one bigger glad you made your mind up. I have the same set up with the dart 67 cc heads. I see race mart has the cam for 272.00 plus the ride or the majority of the kit for 720.00 not sure if theres a place to get it cheaper.

 

[volsfan]

Thanks guys for not talking me out of it! Krabben stop messing with my head lol! Summit has it for $671.99 so that will be the place. Also gotta get new pushrods, and rocker arms along with the gaskets so I will be dropping about $1000.00 on them real soon .

 

[boogie]

Nice choice! You will be pleased.

 

[5spd540]

You will enjoy that cam

 

[77nomad]

I have its big brother in my 383. Couldnt tell you how it runs but it sounds great.