Turn over, no start.

[MChamp]

^ yeah I'd make sure wires are correct before getting into internal issues. 5&7 can easily be incorrect. Then maybe pull all the plugs again and see if anything looks off. You'd have to do alot of cranking I'd think to whipe a lobe..

 

[78BBODY]

You do have the plug wires all routed correctly… Right?

Yup! 18436572 I can't even tell you how many times I've taken then off and on. Memorized that just because it this issue lol

 

[78BBODY]

^ yeah I'd make sure wires are correct before getting into internal issues. 5&7 can easily be incorrect. Then maybe pull all the plugs again and see if anything looks off. You'd have to do alot of cranking I'd think to whipe a lobe..

I'll look next time I get a chance. Also going to pull the valve cover to see if the valve is indeed moving. That should tell me if it's gone.

 

[78BBODY]

Finally got it going Got the car out of storage, took everything apart, and with a clear mind, put it back together, and thankfully everything is running fine now I think it was just a tooth off, and because the area around the vacuum advance is very tight, I had put the distributor in a place where I couldn't adjust properly Thanks for your help you guys!

 

[vernonwright]

no fire or its not getting gas